Sales (888) 962-2887  Support (716) 304-0250


Wireless PTZ Transmitter Kit

Item # DWPTZ

Be the first to review this product

Availability: In stock

Regular Price: $450.00

Now only: $379.00

Regular Price: $450.00

Now only: $379.00

Lifetime Technical Support on all purchases

100% Guarantee with 30 Day Return Policy

Premium Service from



Cost effective and realiable wireless video and data transmitter and receiver kit for use with Pan Tilt Zoom cameras that are Pelco-D protocol compatible. This kit will work with any Pelco-D compatible PTZ camera, as well as any Turning Motor that works off of RS485. This wireless PTZ kit is designed for sending video, audio, and PTZ controls signals wirelessly all through one device. The data portion of the signal is a 2-way signa so you can send and receive PTZ signals from both transmitter and receiver.

These are capable of working up to 300 feet away but can be made to work over even longer distances with our panel antennas. We recommend the use of our 2.4GHz High Gain Panel Antenna to boost the signal. Keep in mind that wireless transmission is best with line of sight and you can always use a high gain antenna to boost your signal to run the signal farther.

These are great for professionals and DIYers looking to setup their PTZ camera wirelessly where there is local power available. You connect the transmitter to your camera, and the receiver connects to either a TV/Monitor or DVR. You can even connect a PTZ joystick to the receiver to control the camera directly.

Both the Transmitter and Receiver units are small (approx. 5 inches in width and length) and extremely light weight. The digital frequency hopping technology allows you to use multiple transmitters and receiver kits in one location. Since these units run on a digital wireless 2.4GHz signal they are great for use where there is WiFi or wireless internet signal without interference. Also great for use in open spaces or out in the country.

We recommend that you get an outdoor weather proof enclosure if you intend to leave these units outside. 


  • 1x 2.4GHz Audio/Video/DataTransmitter
  • 1x 2.4GHz Audio/Video/Data Receiver
  • 2x Power Supplies
  • 2x 3dbi Antennas

If you have further questions about this item, please feel free to contact our technical support staff.


2400-2480 MHz, 25-CH Auto Hopping
RF TX Power
100mW (Average)
Min. RX Sensitivity
-80 dBM
Video Compression
Max. Frame Rate vs. Resolution
NTSC: 30fps at 720 x 480 (D1) 
Bit Rate
Up to 6Mbps
Sampling Rate
48KHz, Stereo
S/N Ratio
2-wire RS485 Half Duplex Baud Rate: 
2400/4800/9600 bps
Fixed Formats: 1 Start bit, 1 Stop bit, 8 Data Bits, 
No Parity 120ΩTermination Resistor 
ON/OFF Setting
LED Indicators
Power On and RF Link Status
Green LED
RS-485 Data Link Status
Mechanical & Environmental
Power Consumption
230mA @ 12VDC
Operation Temperature
Storage Temperature

Additional Info

Additional Info

Warranty 1 Year
Return Policy 30 Days Return Policy


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Let our experienced representatives help you. Call 716-304-0250